Publications

Journal Papers

25- Moghadaripour, M., Azimi, A. H., and Elyasi, S. (2017) “Experimental Study of Oblique Particle Clouds in Water” International Journal of Multiphase Flow, Vol. 91, pp. 101-119.

24- Hakim, S., and Azimi, A. H. (2017) “Submerged flows over triangular weirs and of finite crest length with upstream and downstream ramps” ASCE, Journal of Irrigation and Drainage Engineering, ASCE, Vol. 143(8), 06017008-1-12.

23- Mohammadidinani, N., Azimi, A. H., and Elyasi, S. (2017) “Experimental Investigation of Sand Jets Passing through Immiscible Fluids” Journal of Fluids Engineering, ASME, Vol. 139(5), 051303, 13 p.

22- Moghadaripour, M., Azimi, A. H., and Elyasi, S. (2017) “Experimental Study of Sand Jets and Particle Clouds in Water” ASCE, Journal of Engineering Mechanics, Vol. 143(9), 04017082-1-17.

21- Azimi, A. H. (2017) “Analysis of slump test for sand-foam mixtures” ASCE, Journal of Materials in Civil Engineering, ASCE, Vol. 29(9), 04017109-1-16.

20- Pakzad, L. and Azimi, A. H. (2017) “Investigations on the Dynamics of Particle Clouds in Stagnant Water Using Response Surface Methodology” Canadian Journal of Civil Engineering, CSCE, Vol. 44(2), 117-128.

19- Azimi, A. H., Cai., J., Zhu, D. Z., Rajaratnam, N. (2017) “Selective withdrawal of non-Newtonian viscoelastic fluid.” ASME, Journal of Fluids Engineering, ASME, Vol. 139, 081102-1-14.

18- Azimi, A. H. (2016) “Free surface flow characteristics of multi-phase viscoplastic fluids on inclined flumes and planes.” International Journal of Multiphase Flow, Vol. 79, 59-69.

17- Cai., J., Azimi, A. H., Zhu, D. Z., Rajaratnam, N. (2016) “Experimental Study on Pumping Viscoplastic Fluids.” Canadian Journal of Civil Engineering. Vol. 43, 675-684.

16- Azimi, A. H., Rajaratnam, N., Zhu, D. Z. (2016) “Water surface characteristics for submerged rectangular sharp-crested weirs.” Journal of Hydraulic Engineering, ASCE, Vol 142(5) 06016001-9.

15- Azimi, A. H. (2015) ”Experimental investigations on the physical and rheological characteristics of sand-foam mixtures” Journal of Non-Newtonian Fluid Mechanics, Vol. 221, pp. 28-39.

14- Azimi, A. H., Qian, Y., Zhu, D. Z., Rajaratnam, N. (2015) “An experimental study on circular slurry wall jets.” International Journal of Multiphase Flow, Vol. 74, pp. 34-44.

13- Azimi, A. H., Zhu, D. Z., Rajaratnam, N. (2014) “An experimental study of sand deposition from slurry wall jets.” Journal of Engineering Mechanics, ASCE, Vol. 140, No. 2, pp. 296-314.

12- Azimi, A. H., Rajaratnam, N., Zhu, D. Z. (2014) “Submerged flows over rectangular weirs of finite crest length.” Journal of Irrigation and Drainage Engineering, ASCE, Vol. 140, No. 5, 06014001-12.

11- Azimi, A. H. (2013) Discussion of “Experimental studies on flow over labyrinth weir.” Journal of Irrigation and Drainage Engineering, ASCE, Vol. 139, No. 12, pp. 1053-1055.

10- Azimi, A. H., Rajaratnam, N. (2013) Discussion of “Backwater effects of Jambor weir sill.” Journal of Hydraulic Research, IAHR, Vol. 51 (3), pp. 336-338.

9- Azimi, A. H., Rajaratnam, N. (2013) Discussion of “New theoretical solution of the stage-discharge relationship for sharp-crested and broad weirs.” Journal of Irrigation and Drainage Engineering, ASCE, Vol. 139(6), pp. 516-517.

8- Azimi, A. H., Rajaratnam, N., Zhu, D. Z. (2013) “Discharge Characteristics of Finite Crest Length Weirs with Upstream and Downstream Ramps.” Journal of Irrigation and Drainage Engineering, ASCE, Vol. 139(1), pp. 75-83.

7- Azimi, A. H., Rajaratnam, N., Zhu, D. Z. (2012) “A Note on Sharp-crested Weirs and Weirs of Finite Crest Length.” Canadian Journal of Civil Engineering, CSCE, Vol. 39(11), pp. 1234-1237.

6- Azimi, A. H., Zhu, D. Z., Rajaratnam, N. (2012) “Computational investigation on vertical slurry jets.” International Journal of Multiphase Flow. Vol. 47, pp. 94-114.

5- Azimi, A. H., Zhu, D. Z., Rajaratnam, N. (2012) “Experimental study of sand jet front in water.” International Journal of Multiphase Flow. Vol. 40, pp. 19-37.

4- Azimi, A. H., Zhu, D. Z., and Rajaratnam, N. (2011) “Effect of particle size on the characteristics of sand jet in water.” Journal of Engineering Mechanics, ASCE, Vol. 137, No. 12, pp. 822-834.

3- Azimi, A. H. and Rajaratnam, N. (2009) “Discharge characteristics of weirs of finite crest length.” Journal of Hydraulic Engineering, ASCE, Vol. 135(12) pp. 1081-1085.

2- Etemad-Shahidi, A. and Azimi A. H. (2007) “Simulation of thermal discharges using two mixing zone models.” Journal of Coastal Research, Vol. 50, 658-662.

1- Etemad-Shahidi, A., Azimi, A. and Hadjizadeh-zaker, N. (2006) “Numerical simulation of Boston outfall in stagnant ambient current”, Journal of Coastal Research, SI 39, pp. 1520-1523.

Conference Papers

13- Mohammadidinani, N., and Azimi, A. H. (2017) “Simulation of negatively buoyant fountains using data mining methodology.” CSCE Conference, Vancouver, CA, HYP-1-8.

12- Azimi, A. H. (2015) “Flow of foam mixtures on inclined flumes and surfaces.” CSCE Conference, Regina, CA, DPM-067-01-08.

11- Azimi, A.H., Cai, J., Hall, N., Oshikawa, H., Zhu, D. Z., and Rajaratnam, N., (2011) “Mound formation by slurry jets on a slope in a water pond.”34^th IAHR world congress, Australia, pp. 3346-3353.

10- Azimi, A., Zhu, D., Rajaratnam, N., (2008) “Numerical simulation of sand jet in water.”1^st International Oil Sand Conference, Edmonton, Dec. 2008. Pp. 183-191.

9- Azimi, A., Azizi, F. and Etemad-Shahidi, A., (2005) “A new formulation for estimation of initial dilution of dense jet flow.” 31^th IAHR world congress, Seoul, pp.4241-4248.

8- Etemad-Shahidi, A. and Azimi, A., (2005) “Performance of Cormix model applied to dense jet flow.” 31^th IAHR world congress, Seoul, pp. 4211-4218.

7- Azimi, A. and A. Etemad-Shahidi, A., (2004) “Comparison of Lagrangian models for predicting outfall dilution.” MWWD and IEMSS Conference, Catania, Italy, pp. E12.

6- Etemad-Shahidi, A. and  Azimi, A., (2004) “Near field modeling of T diffuser performance with a mixing zone model.” MWWD and IEMSS Conference, Catania, Italy, pp. E13.

5- Etemad-Shahidi, A and Azimi, A.H., (2003) “Testing the Cormix and Visjet models to predict the dilution of Sanfrancisco outfall.” 7^th IWA Conference on diffuse pollution and basin management (DIPCON), Dublin, pp.129-134.

4- Azimi, A.H. and Etemad-Shahidi, A., (2003) “Performance of an integral type model applied to ocean outfalls.” 7^th IWA Conference on diffuse pollution and basin management (DIPCON), Dublin, pp. 134-139.

3- Azimi, A.H. (2003) “Numerical simulation of Tee diffusers with crossflow.” 30^th IAHR world congress, Thessaloniki, pp. 319-322.

2- Azimi, A.H. and Etemad-Shahidi, A., (2003) “Testing an integral model for simulation of thermal discharges.” 30^th IAHR world congress, Thessaloniki, pp. 619-624.

1- Azimi, A.H. and Etemad-Shahidi, A. (2003) “Numerical simulation of an outfall in shallow waters.” 6^th International Conference on Civil Engineering, Isfahan, Iran, pp. 175-179.